| Model |
AN 610 |
| Top cutterhead motor |
15 HP |
| Bottom cutterhead motor |
10 HP |
| Feeding motor |
3 HP |
| Opening hoist motor |
0.5 HP |
| Maximum working width |
610 mm |
| Maximum working thickness |
170 mm |
| Minimum working thickness |
6 mm |
| Maximum working length |
315 mmtd>
|
| Quantity of knife blades |
4 pcs |
| Size of knife blade |
610 x 6.35 x 38 mm |
| Cutterhead speed |
4000 r.p.m |
| Feeding speed |
7 - 17 m/min |
| Machine dimensions (L x W x H) |
2650 x 1150 x 1600 mm |
| Machine weight |
3000 kgs |
| * The machine employs an automatic lubricator for delivering oil to the caterpillar chain slideways. This not only ensures smooth running of the caterpillar chain at on time, but also prevents its damage due to forgetting manual lubrication |
* Thickness of cut can be set by using a wood block with the thickness the same as the product. It combines with the limit switch control for convenient and fast thickness setting |
| * The bottom cutterhead can be pulled out from the side. When setting knives is required, simply pull the cutterhead for convenient and fast knife setting |
* The machine is equipped with straight-knife cutterheads as standard accessories. Each cutterhead is fitted with four straight knives |
| * The fully open belt guard provides added convenience for belt tension adjustment. Employs oil and heat resistant belt |
|
| Origin |
Yuan - Taiwan |
